Home Base Car Kit Progress Cost Sponsors  
   

Job 30 : Bond On Rear End

 

 

Hours Spent : 8

 

Probably the most important stage of the project fixing the rear section on.   The rear panel is held in place with fibreglass and fibreglass filling, screws are used to hold the kit in place while the fibreglass sets.  First the paint must be ground off, I used an angel grinder for this, then a layer of fibre glass placed on followed by the back section of the kit.

 

 

With the back stuck on I used fibreglass filler to fill any gaps where the kit meets the car.